



106枚の写真
所在地
Grand Valley, ON, CAN
Grand Valley, ON, CAN
使用状況
89,076 km (55,350 mi)
89,076 km (55,350 mi)
シリアル番号
1HTWCAZR4DJ202125
1HTWCAZR4DJ202125
Loading...
Ritchie Bros.の資格を持つ従業員が機械の詳細情報を収集し、主要コンポーネントの機能テストを行いました。オークション当日に入札を行う前に、会場にてお客様、あるいは代理の方がアイテムを検査することも可能です。
ID番号
#15161630
ヤード内
はい
機能
International MaxxForce 9 6 Cylinder 9.3 L Diesel 330 hp Engine, 2012 US EPA Label, Positive Air Shutoff, 7641 Engine hrs, Allison Automatic Transmission, Differential Lock, 14000 lb Front Axle, 21000 lb Rears, 35000 lb GVWR, Air Ride Cab, 12R22.5 Front Tires, 11R22.5 Rear Tires, Air Ride Suspension, 187 in Wheelbase, PTO, 700 lb Capacity, Rear Mounted, Insulated Two-Person Articulated Boom, Lower Boom Fiberglass Insert, Utility Body, Turret Mounted Winch, A-Outriggers, Rear Outriggers, 16 ft x 94 in Bed, Pintle Hitch




















Featured Photo
Serial Number / VIN
1HTWCAZR4DJ202125
Frame Stamp Serial Number/VIN Photo
Hour Meter / Odometer
89076 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational















Emissions Information
2012 US EPA Label
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Air Compressor
Operational
Fuel System
Operational
Exhaust System
Diesel Particulate Filter
Radiator
Oil Leaks
Turbo return line. Base of oil filler tube.
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran.


















Engine Hours
7641 Engine hrs
Mirrors
Window Controls
Both Power
Seats/armrests
Seat Belts
Operational
Steering Control
Horn
Air horn operational, Electric horn operational
Oil Pressure
The gauge registers in the operating range. 31 PSI
Warning Lights
Operational
Gauges
Operational
Gear Selector
Brake Control
Operational
Clutch
Engages
PTO Control
Operational
ECM Miles
55349 ECM mi
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.










Transmission
Operational
Drive Shaft
Power Take Off
Operational
Steer Axle
Limited Function Check
The drivetrain was operational.












Pumps (Hydraulics)
Valves
Hydraulic Tank
Dripping leak
Hoses (Hydraulic)
Boom Lift Cylinder
Dripping leak
Secondary Boom Cylinder
Stabilizer Cylinders
Cylinders
Dripping leak on the left cylinder
Auxiliary Hydraulic Plumbing
Capped off, Rear
Limited Function Check
The hydraulic system was operational.































Bed Body
Support Frame
Limited Function Check
The main chassis components were operational in a limited check.
Tool / Work Box
Painted to match body
Steering Linkage
Brake Type
Air brakes
Brake Lines/Hoses
Not operationally checked
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Suspension Bushings
Cab Suspension Air Bags
External Electrical / Air Connections
Not operationally checked
Frame Condition
Wheel Condition
Lugs
Dielectric Certification
There is a Dielectric Certification label with an expiration date of March 2021
Turntable Bearing
Boom Condition
Work Bucket
Hydraulic Controls
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Aug 14, 2025 | Aug 14, 2025 |
| Silicon | 2.51 PPM | 2.47 PPM |
| Tin | 0.22 PPM | 0.01 PPM |
| Silver | 0 PPM | 0 PPM |
| Aluminum | 8.13 PPM | 0.25 PPM |
| Chromium | 0.08 PPM | 0.1 PPM |
| Lead | 0.38 PPM | 0.65 PPM |
| Copper | 0.78 PPM | 4.19 PPM |
| Nickel | 0.44 PPM | 0.16 PPM |
| Iron | 37.96 PPM | 3.13 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | N/A |
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。