Ocana, ESP

to fit CAT320 •for 20-30 ton excavator • two hoses

to suit 24-35 ton excavator • Rotation 360° • Open/close operating pressure: 300-340 bar • Open/close oil flow rate: 150-200 l/min • weight 2639kg

to suit 18-26 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 120-180 l/min • weight 1934kg

to fit 16 - 40 ton excavators

to suit 16-22 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 70-120 l/min • weight 1325kg

to suit 18-30 ton excavator • hydraulic flow range 130-150 L/min • Copy of declaration of confirmity available • 1600 kg

to fit 12 - 35 ton excavators

to fit 15 - 35 ton excavators

to suit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

to fit 15 - 32 ton excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 15-24 tons. Max Opening: 33 in. Max Cuntting Force: 107 tons .Weight: 2888 lb. Made of Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel • with bullt-in oll passage • high strength and good toughness;

to suit 15-24 ton excavator • hydraulic flow range 90-120 L/min •Copy of declaration of confirmity available • 1300 kg

to fit 9 - 25 ton excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: 1 in. Weight: 3034 lb. Chisel Dia: 135 mm .Includes: 1 circuit breaker • 135mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shell is lengthened to enhance its firmness

to suit 8-12 ton excavator • Rotation 360° • Open/close operating pressure: 250-280 bar • Open/close oil flow rate: 50-70 l/min • weight 596kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shellis lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shellis lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 28-40 tons. Weight: 6724lb.Chisel Dia: 155 mm. Includes: 1 circuit breaker • 155mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness.

to suit 12-17 ton Excavator • Shell width 705mm • Weight 754kg

to suit 8-14 ton mini Excavator • Shell width 605mm • Weight 560kg

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.7 yd³. Weight: 4722 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500. 4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Suitable for Cat336 or 30-38 ton excavators. Capacity: 2.3 yd³. Weight: 3567 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400、HARDOX450/500. 4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to fit 15 - 32 ton excavators

Suitable for Cat336 or 30-38 ton excavators. Capacity: 1.5 yd³. Weight: 3492 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400、HARDOX450/500. 4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to suit 25-40 ton excavator • hydraulic flow range 120-180 L/min • Copy of declaration of confirmity available • 2000 kg

silence type • for 25-37 ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-28 tons. Max Opening: 19 in • Weight: 2877 lb. Made of Swedish Hardox Hituf steel • good toughness and wear resistance: The pin is made of 42CrMo alloy steel with high strength and toughness.

to suit 12-20 ton Excavator • Copy of declaration of confirmity available • Weight 1005 kg

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.3 yd³. Weight: 2064 lb. 1. Oem standard bucket. 2. Strong and durable construction to withstand robust working conditions. 3. High quality materials:NM360/400 • HARDOX450/500. 4. Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.2 yd³. Weight: 2249 lb. 1.Oem standard bucket.2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400、HARDOX450/500. 4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to fit 8 - 16 ton excavators

Fits 15- 32 Ton Excavators

Suitable for Cat320 or 17-24 ton excavators. Capacity: 1.3 yd³. Weight: 2064 lb. 1.Oem standard bucket. 2.Strong and durable construction to withstand robust working conditions. 3.High quality materials:NM360/400 • HARDOX450/500. 4.Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to suit 18-25 ton Excavator • Weight 798

to suit 7-12 ton mini Excavator • Shell width 555mm • Weight 410kg

to fit 6 - 14 ton excavators

to suit 1-4 ton mini excavator • with rotation • weight 175kg

to suit 10-15 ton Excavator • Weight 545

to fit 4 - 12 ton excavators

to fit 6 - 14 ton excavators