




33枚の写真
所在地
Livingston, LA
Livingston, LA
使用状況
19,005 時間
19,005 時間
シリアル番号
JKADTCA14NB500105
JKADTCA14NB500105
Loading...
Ritchie Bros.の資格を持つ従業員が機械の詳細情報を収集し、主要コンポーネントの機能テストを行いました。オークション当日に入札を行う前に、会場にてお客様、あるいは代理の方がアイテムを検査することも可能です。
ID番号
#14832122
ヤード内
はい
年
2022
製造業
モデル
資産の種類
シリアル番号またはVIN
JKADTCA14NB500105
機能
Open Operator Station, 6 Passenger, Windshield, Brush Guard, Manual Dump Bed, 2022 US EPA Label, Yanmar 3TNM74F-SAKV 3 Cylinder 0.993 L Diesel Engine, Equipment-from-Sunbelt-Rentals
注記
Inoperable items must be removed from yard by April 3rd and cannot be relisted ; Buyer's responsibility for removal ;









Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
JKADTCA14NB500105, The serial number is not legible. This unit may be difficult to export.
Hour Meter / Odometer
19005 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.









Limited Function Check
The main components are in place and operational as noted.






Limited Function Check
After jump starting, the engine ran.




Limited Function Check
The drivetrain would not engage.





Deficiencies
Deficient Components/Systems Include but are not limited to: Control Station Section, Drivetrain Section, Other Front doors. Tailgate. Tail light., Unit stuck in gear. Drivetrain would not engage. Tailgate broken. Driver side tail light broken. Both front doors missing. Passenger rear tire deflated. No key.
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。