




26枚の写真
所在地
Carleton, MI
Carleton, MI
使用状況
2,087 時間
2,087 時間
シリアル番号
HOP077254
HOP077254
Loading...
Ritchie Bros.の資格を持つ従業員が機械の詳細情報を収集し、主要コンポーネントの機能テストを行いました。オークション当日に入札を行う前に、会場にてお客様、あるいは代理の方がアイテムを検査することも可能です。
ID番号
#14683867
ヤード内
はい
年
2018
製造業
資産の種類
シリアル番号またはVIN
HOP077254
機能
200 psi Working Pressure, 2018 US EPA Label, John Deere 4045HFC04A 4 Cylinder 130 kW 4.5 L Diesel Engine, Requires Diesel Exhaust Fluid, Lunette Ring Carrier Trailer, Electric Brakes, Equipment-from-Herc-Rentals
注記
Michigan dealer title- buyers must complete all necessary paperwork prior to title being processed. All USA buyers must have a driver's license & valid US insurance for title processing that matches registered account name. Item cannot be released until all required paperwork is completed & originals are received. Title is not immediately available.






Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
HOP077254, No serial number or manufacturer’s identifying number found. This unit may be difficult to export.
Hour Meter / Odometer
2087 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Emissions Status
2018 US EPA Label












Limited Function Check
The engine could not be started.


Limited Function Check - Air Compressor
The compressor and related components could not be operationally checked.






Deficiencies
Deficient Components/Systems Include but are not limited to: Control Station Section, Engine Section, The engine will not start due to two ECU codes.
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。