



138枚の写真
所在地
Svappavaara, NRBT, SWE
Svappavaara, NRBT, SWE
シリアル番号
KMTHD031K29010925
KMTHD031K29010925
Loading...
このロットは、IronClad保険によって保護されています
このロットは有資格検査員による十分かつ詳細な検査を受けています。安心してご購入ください。
ID番号
#14350756
ヤード内
いいえ
機能
Air Conditioner, Retarder, Rear View Camera, Air Ride Seat, Heated Body, Auto Lube, Fast Fuel Fill, 24.00R35 Tires
注記
<h2>Seller supplied service records are available; please see below for a summary of the primary replaced components.</h2> <ul> <li>New engine at 42734 hrs</li> <li>New turbo at 37213 hrs </li> </ul>










































Serial Number / VIN
KMTHD031k29010925
CE Mark
CE Marked
Hour Meter / Odometer
23457 See Report, Changed instrumentation, odometer reading changed from 44370 hours to 14360 hours so 30000 hours missing, Hours may increase as unit is still in use by seller-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Indication of Additional Hours
There are repair records with the following meter reading greater than that on the meter: 44370
Paint
Sheet Metal (fiberglass) Condition
Corrosion and right side mudgard holder crushed
Steps/Ladders
Hand Rails
Welds on left side handrail where mirror attaches, Plate weld between walkway sections
Exterior Lights
Operational, Some not operational, Left most front light lights are not operational
Travel Alarm
Inoperable
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual




















Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Gear selector missing gear numbers
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.












Engine
No US EPA Label Present No Engine Markings Found
Emission Label
Could not locate
Engine Serial Number
Could not locate
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran.









Transmission
Operational
Transfer Case / Drop Box
Operational
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.








Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Cylinders
Right cylinder leakingfrom seal
Steering Cylinders
Limited Function Check
The hydraulic system was operational.















































Steering Linkage
Frame Condition
Suspension Cylinders
Suspension Pivot Points
Limited Function Check
The main chassis components functioned during a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Left Front Steer Tire
Right Front Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Bed Body
Corrosion noted, Welds on rear of dump body
Bed Liner
Bed Pads
Abit worn
Hinge Points
Limited Function Check
The main chassis components were operational in a limited check.
Ritchie Bros.の充実したドアツードア物流および配送ソリューションで、機器を必要な場所にお届けします。国境、大陸、海を越えてお客様の機器を迅速かつ効率的にお届けするオールインクルーシブサービスで、輸送のすべての工程に対応いたします
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。