103 Photos
Nisku, AB, CAN
95,586 km (59,394 mi)
750174
Loading...
Ritchie Bros.の資格を持つ従業員が機械の詳細情報を収集し、主要コンポーネントの機能テストを行いました。オークション当日に入札を行う前に、会場にてお客様、あるいは代理の方がアイテムを検査することも可能です。
ID番号
#11237580
ヤード内
いいえ
年
2001
製造業
モデル
シリアル番号またはVIN
750174
機能
Eaton Fuller 13 Speed Manual Transmission, 11326 hrs Carrier Engine, Detroit Series 60 6 Cylinder 12.7 L Diesel Carrier Engine, Anti Two-Block, Load Moment Indicator, 40 ft Minimum 126 ft Maximum Boom Length, Auxiliary Hoist, Rooster Sheave, 38 ft to 60 ft Extendable Swingaway Jib, 50 ton Capacity Gunnebo Johnson 5 Sheave Hook Block, 350 lb 19 ton Capacity Overhaul Ball
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
750174
Hour Meter / Odometer
59394 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Safety Certification Label
There is a safety certification label with a date of Sept 16/2023
Safety Certification Report
Safety Certification Report Not Available
Load Chart
Yes
Lower/Carrier Engine Hours
11326 hrs Carrier Engine
Limited Function Check
The main components are in place and operational as noted.
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Limited Function Check
The hydraulic system was operational. The PTO Engaged but the Boom, Winches and Outriggers were not Operationally Checked.
Hour Meter Reading
11379 Hours-IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。