78 Photos
Boonville, MO
1,278 時間
220180
Loading...
このロットは、IronClad保険によって保護されています
このロットは有資格検査員による十分かつ詳細な検査を受けています。安心してご購入ください。
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
220180
CE Mark
No CE mark found
Hour Meter / Odometer
1278 hrs, Meter inoperable-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Safety Certification Label
There is a safety certification label with a date of 12.7.24
Safety Certification Report
Safety Certification Report Available
Load Chart
Yes
Travel Alarm
Operational
Horn
Inoperable
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Mirrors
Glass
No visible damage
Seats/Armrests
Load Moment Indicator
Not operationally checked with a load., PAT, DS350
Controls Hydraulic or Air
Load Charts
Chart book in cab
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Drum Rotation Indicator
Operational
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
No US EPA Label Present
A/C Compressor
In place; ambient temperature too cold to check operation Not visible for photo.
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Valve cover
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
No accessible for photo.
Engine - Right Side
Limited Function Check
The engine started and ran.
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Limited Function Check
The hydraulic system was operational.
Hoist Drums
Hydraulic Operation
Main Boom Pins
Point Sheaves
Boom Point Section
Boom Length
JIB Length
Boom Angle Indicator
Turntable Bearing
Swing Drive
Operational
Limited Function Check
The main chassis components functioned when checked without a load.
Jib
Main Load Block
Overhaul Ball
Counterweights
Oil Sample Analysis
engine | |
---|---|
date of analysis | Mar 28, 2025 |
Silicon | 8.83 PPM |
Tin | 0 PPM |
Silver | 0 PPM |
Aluminum | 2.46 PPM |
Chromium | 0.14 PPM |
Lead | 0 PPM |
Copper | 0.7 PPM |
Nickel | 0 PPM |
Iron | 9.37 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。