Ocana, ESP

to suit 8-14 ton excavator • Shell width 605mm • weight 560kg

silence type • for 20-30ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 17-24 tons. Weight: 1711lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Using high-strength steel plates • casting protective plates and blocks • and special processing techniques • the weld bead is widened and the service life is extended.

to suit 8-14 ton Excavator • Shell width 605mm • Weight 540kg

to suit 4-9 ton mini Excavator • Shell width 505mm • Weight 260kg

BKT345D66HD 66 inch excavator heavy duty bucket to fit CAT345 •for 40-50 tons excavator

to suit 7-12 ton Excavator • Shell width 555mm • Weight 410kg

to suit 7-12 ton Excavator • Shell width 555mm • Weight 400kg

to fit CAT315 •for 10-18 ton excavator • two hoses

to suit 6-12 ton Excavator • Copy of declaration of confirmity available • Weight 430 kg

to suit 4-9 ton mini Excavator • Shell width 505mm • Weight 255kg

to suit 6-12 ton Excavator • Copy of declaration of confirmity available • Weight 460 kg

to suit 6-9 ton Excavator • Weight 328kg

to fit 20-30 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 70-90 l/min • opening width 2100mm • weight 1395kg

to fit 9 - 19 ton excavators

to suit 2-5 ton mini Excavator • Shell width 405mm • Weight 143kg

to fit 16-24 ton mini excavator • operating pressure open/closed: 220-260 bar • min. oil volume open/closed: 60-80 l/min • opening width 1850mm • weight 820kg

to fit 20-28 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 60-80 l/min • opening width 1950mm • weight 1275kg

to fit CAT305 •for 4-7 ton excavator • two hoses

to fit CAT305 •for 4-7 ton excavator • two hoses

to fit 7 •5-10 ton mini excavator • operating pressure open/closed: 200-240 bar • min. oil volume open/closed: 25-35 l/min • opening width 1550mm • weight 429kg

to fit 1.5 - 5.5 ton excavators

to suit 4-10 ton Excavator • Copy of declaration of confirmity available • Weight 325 kg

to suit 4-10 ton Excavator • Copy of declaration of confirmity available • Weight 340 kg

to suit 2-5 ton mini Excavator • Shell width 405mm • Weight 144kg

to suit 3-5 ton Excavator • Weight 182kg

to suit 3-7 ton excavator • weight 110kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 30-38 tons. Weight: 1640 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Manufactured from high strength steel NM400. Heavy-duty base plate/ Heavy-duty teeth with teeth protector.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 40-49 tons. Weight: 2460 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Manufactured from high strength steel NM400. Heavy-duty base plate/ Heavy-duty teeth with teeth protector.

to fit 1.5 - 5.5 ton excavators

to fit CAT305 • for 4-8 ton excavator • with hoses

auger bit to fit 1 •5-5 ton excavator • Copy of declaration of conformity available • 80kg +back support HEB1200

Diesel • 7 Seats

to suit 3-7 ton Excavator • Copy of declaration of confirmity available • Weight 275 kg

to suit 3-7 ton Excavator • Copy of declaration of confirmity available • Weight 290 kg

to suit 7-10 ton excavator • with 50mm Pin System (Pin to Pin 292mm/ wide 232mm) • weight 265kg

to suit 7-10 ton excavator • weight 265kg

to suit 7-10 ton excavator • weight 285kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 11-16 tons. Chisel Dia:100mm •weight:1984lb.Includes: 1 circuit breaker • 100mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness

2.5cu

to fit 5.2 - 11.5 ton excavators

silence type • for 7-9ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

silence type • for 7-9ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

to suit 3-6 ton Excavator • Copy of declaration of confirmity available • Weight 205 kg

to suit 3-6 ton Excavator • Copy of declaration of confirmity available • Weight 200 kg

to suit 4-9 ton mini Excavator • Shell width 505mm • Weight 260kg