




56枚の写真
Newnan, GA
168,328 mi (270,898 km)
1FVHG5BS2DHFH5401
Loading...
検査報告はまもなくご覧いただけます。後ほどご確認ください。
ID番号
#14358535
ヤード内
はい
年
2013
製造業
モデル
シリアル番号またはVIN
1FVHG5BS2DHFH5401
機能
Cummins ISC 6 Cylinder Diesel 300 hp Engine, 16216.9 Engine hrs, Allison 3500 Automatic Transmission, 18000 lb Front Axle, 46000 lb Rears, Meritor RT-46-160 Drive Axles, 5.63:1 Axle Ratio, Air Ride Cab, 11R22.5 Front Tires, 11R22.5 Rear Tires, Double Frame, TufTrac Spring Suspension, 178 in Wheelbase, PTO, CNV 14 ft Long x 4 ft 8 in High Steel Body, Electric Roll Tarp, Ringfeder







Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
1FVHG5BS2DHFH5401
Second Serial Number/VIN Photo
Hour Meter / Odometer
168328 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.






Emissions Information
US EPA Label not legible
Limited Function Check
The engine started but did not run smoothly. After shutting down engine would not restart




Limited Function Check
The drivetrain was operational.


Brakes
The brakes are operational.



Limited Function Check
The hydraulic system was operational.

















Engine Hours
16216.9 Engine hrs
Limited Function Check
The main components are in place and operational as noted.

















Deficiencies
Deficient Components/Systems Include but are not limited to: Engine Section, Other Check lights on the dash, engine started and ran, after shutting down engine would not restart
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。