72 Photos
Charlotte, NC
202,037 mi (325,148 km)
1M2AG11C46M050444
Loading...
Ritchie Bros.の資格を持つ従業員が機械の詳細情報を収集し、主要コンポーネントの機能テストを行いました。オークション当日に入札を行う前に、会場にてお客様、あるいは代理の方がアイテムを検査することも可能です。
ID番号
#13452919
ヤード内
はい
年
2006
製造業
資産の種類
シリアル番号またはVIN
1M2AG11C46M050444
機能
Mack 6 Cylinder Diesel 375 hp Engine, 23386.7 Engine hrs, Engine Brake, Allison Automatic Transmission, Mack Drive Axles, Air Ride Cab, Aluminum and steel on rear axles.LR studs on double aluminum; not going threw wheel logs,, 425/65R22.5 Front Tires, 11R22.5 Rear Tires, Camelback Walking Beam Suspension, 255 in Wheelbase, Hydraulic System, Kimble 498 cyd Mixer Unit, 3 Removable Chutes
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
1M2AG11C46M050444, The serial number is not legible. This unit may be difficult to export.
Second Serial Number/VIN Photo
Hour Meter / Odometer
202037 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Emissions Information
US EPA Label not legible
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Brakes
The brakes are operational.
Limited Function Check
The hydraulic system was operational.
Engine Hours
23386.7 Engine hrs
Limited Function Check
The main components are in place and operational as noted.
Deficiencies
Deficient Components/Systems Include but are not limited to: Other LR wheel studs not going through lug nuts as required.
機械の詳細情報は範囲に制限があり、Ritchie Bros. Auctioneersは、ここに明記するもの以外の設備やコンポーメントの検査は行っていません。特に明記されていない限り、明示的または黙示的かにかかわらず、Ritchie Bros.は機械やそのコンポーネントに関する一切の責任を負わないものとします。機能性、快適性、あるいは関係官庁や規制機関が定める安全基準や要件に関する準拠性、特定目的への適合性、または商品性に関する表明や保証も含まれますが、これらに限るわけではありません。お客様には入札される前に必ず機械の検品を行うことをお勧めします。
機械は負荷の下でのテスト、または利用可能なすべてのギアを使用してのテストを行ったわけではありません。機械が、メーカーの仕様に従って動作されていたか保証はできません。ここで公開されている以外の機能性テストは実施されていません。個々のアンダーキャリッジコンポーネントについては選択中の写真のみが提供されています。このため、アンダーキャリッジ全体の状態を示さないことがあります。
寸法は、あくまで参考として表示されています。実際に積載された状態での寸法は、トラックやトレーラーの高さ、積載された機械の構成や位置により異なります。オークションの会場から搬出する前に、すべての積載物が運搬可能な状態になっているかの確認は、バイヤーの責任になります。全寸法は、お客様によって採寸・確認を行うようお願いします。運搬に際して、これらの寸法はあくまで参考としてお使いください。