Caorso, ITA

5-Speed Manual Transmission • 195/70R15C Front Tires • 195/70R15C Rear Tires • 200 kg Capacity • Articulating-Telescopic Boom • A-Outriggers

Petrol Engine • 5-Speed Manual Transmission • 165/65R14 • 200 kg Capacity • Articulating-Telescopic Boom • A-Outriggers

Air Ride Suspension • 385/65R22.5 Tires

Air Ride Suspension • 385/65R22.5 Tires

Manual Transmission • 11R22.5 Front Tires • 11R22.5 Rear Tires

to fit 24 - 48 ton excavators

to fit 12 - 35 ton excavators

to fit 10 - 30 ton excavators

to fit ZX160-6 • to fit ZX160-6

to fit ZX130-6 • to fit ZX130-6

to fit ZX210-6 • to fit ZX210-6

to fit 9 - 19 ton excavators

to fit 15 - 35 ton excavators

auger bit to suit 1 •5-4 ton excavator • Copy of declaration of conformity available • 80kg • auger bit to suit 1 •5-4 ton excavator • Copy of declaration of conformity available • 80kg

137cm • 137cm

to suit 1 •5-3 ton excavator • with 30mm pin system (wide 110mm • pin to pin 125mm) • hydraulic flow range 15-30 L/min • Copy of declaration of conformity available 96 kg • to suit 1 •5-3 ton excavator • with 30mm pin system (wide 110mm • pin to pin 125mm) • hydraulic flow range 15-30 L/min • Copy of declaration of conformity available 96 kg

to suit 1 •5-3 ton excavator • Oil flow (l/min) 30-60 • operating pressure (bar) 100-130 • weight 115kg • to suit 1 •5-3 ton excavator • Oil flow (l/min) 30-60 • operating pressure (bar) 100-130 • weight 115kg

210cm • to fit backhoe loader and telehandler • water kit • 210cm • to fit backhoe loader and telehandler • water kit

to suit 5 •0-8 •0 ton mini excavator • closing force 16 •5kN • opening width 1500mm • weight 204kg Lifting power: 2650 kg max. Clamp Width: 420 mm Height opened: 1200 mm • to suit 5 •0-8 •0 ton mini excavator • closing force 16 •5kN • opening width 1500mm • weight 204kg Lifting power: 2650 kg max. Clamp Width: 420 mm Height opened: 1200 mm

to suit 5 •0-8 •0 ton mini excavator • closing force 16 •5kN • opening width 1500mm • weight 171kg Lifting power: 2650 kg max. Clamp Width: 420 mm Height opened: 900 mm Non rotating • to suit 5 •0-8 •0 ton mini excavator • closing force 16 •5kN • opening width 1500mm • weight 171kg Lifting power: 2650 kg max. Clamp Width: 420 mm Height opened: 900 mm Non rotating

to suit 3 •5-6 •5 ton mini excavator • closing force 11kN • opening width 1275mm • weight 106kg Lifting power: 2000 kg max. Clamp Width: 350 mm Height opened: 750 mm Non rotating • to suit 3 •5-6 •5 ton mini excavator • closing force 11kN • opening width 1275mm • weight 106kg Lifting power: 2000 kg max. Clamp Width: 350 mm Height opened: 750 mm Non rotating

to suit 2 •5-4 •0 ton mini excavator • closing force 10kN • opening width 1020mm • weight 74kg Lifting power: 1500 kg max. Clamp Width: 310 mm Height opened: 630 mm Non rotating • to suit 2 •5-4 •0 ton mini excavator • closing force 10kN • opening width 1020mm • weight 74kg Lifting power: 1500 kg max. Clamp Width: 310 mm Height opened: 630 mm Non rotating

to fit 1.5 - 4.5 ton excavators

to suit 1 •2-3 to mini excavator Copy of declaration of conformity available • to suit 1 •2-3 to mini excavator Copy of declaration of conformity available

to fit JPC excavator

to fit 1.5-2 ton

to suit 3-7 ton mini excavator • 600 mm blade • oil flow 40-75 l/min • weight 77 kg • to suit 3-7 ton mini excavator • 600 mm blade • oil flow 40-75 l/min • weight 77 kg

63" (1600mm) with 90mm pin system (wide 351mm • pin to pin 485mm) • Attention: it is possible to change the pin system into 90/80mm or 2 x 80mm (extra PIN´s are added to the bucket) to suit 22-28 ton excavator volume (SAE) 1630 l • weight: 1395kg; Screwed tooth system: 6 pieces Distance between bars: 100 mm Quantity bars: 13 pieces Thickness of the bars: 20mm Edge protector made of HB400 two side cutters each made of HB400 Heel protection made of HB400 • 63" (1600mm) with 90mm pin system (wide 351mm • pin to pin 485mm) • Attention: it is possible to change the pin system into 90/80mm or 2 x 80mm (extra PIN´s are added to the bucket) to suit 22-28 ton excavator volume (SAE) 1630 l • weight: 1395kg; Screwed tooth system: 6 pieces Distance between bars: 100 mm Quantity bars: 13 pieces Thickness of the bars: 20mm Edge protector made of HB400 two side cutters each made of HB400 Heel protection made of HB400

16" (400mm) • volume (SAE) 46l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 34kg • 16" (400mm) • volume (SAE) 46l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 34kg

8" (200mm) • volume (SAE) 20l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 26kg • 8" (200mm) • volume (SAE) 20l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 26kg

55" (1400mm) with 100/90mm pin system (wide 386mm • pin to pin 500mm) • Attention: it is possible to change the pin system into 100/100mm or 2 x 90mm (extra PIN´s are added to the bucket) to suit 28-36 ton excavator volume (SAE) 1390 l • weight: 1456kg; Screwed tooth system: 5 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shroud out of wear resistance steel NM400 Side Plates S460 Roll sheet S355 • 55" (1400mm) with 100/90mm pin system (wide 386mm • pin to pin 500mm) • Attention: it is possible to change the pin system into 100/100mm or 2 x 90mm (extra PIN´s are added to the bucket) to suit 28-36 ton excavator volume (SAE) 1390 l • weight: 1456kg; Screwed tooth system: 5 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shroud out of wear resistance steel NM400 Side Plates S460 Roll sheet S355

Greasing Pins 70mm • Greasing Pins 70mm

Greasing Pins 90mm • Greasing Pins 90mm

55" (1400mm) Tilt Ditch Bucket • to suit 2 •9-3 •8 ton mini excavator with MS03 • 55" (1400mm) Tilt Ditch Bucket • to suit 2 •9-3 •8 ton mini excavator with MS03

Quick Coupler Bracket

hammer • bucket 200 • bucket 800 to fit to JPC